8/30) am looking for air force e-3 and e-2 Vietnam chevrons in the black stripes with the green background. Do you have these? Bob.
8/30) Hi, I wrote you earlier about a clip for a Remington 222. I should have said it's a Savage Model 340 in .222 Remington. Sorry for any problems, but can you help? Thanks, Chuck
8/27) Dave, I noticed that you have some Winchester Model 10s on your site for sale. I have an old model 10 that needs a stock and a forearm. Do you have just the wood? Or do you have a whole gun that isn't in very good shape, so I could make one gun out of two? I'm the same guy that purchased the old ammo from you about three weeks ago? Thanks, Jerry.
8/26) Dear Sir, I am looking for a cocking piece aperture sight to be installed on a Mauser rifle. Can you help? Shaun, Australia
8/21) Looking for a Iver Johnson "OWL Head" butt plate. Approx. dimensions: 4 5/16" Long, 1 3/8" Wide, and 3" center to center. Thank You, Harry
8/18) I am looking for a firing pin for a pistol "Star" .22 caliber, US Patent 2-563-720, Made in Echevarria, Eibar, Spain. Thank you, Joe
8/14) Hi David, I was just wanting to know if you had rear sights with wings for a Japanese Arisaka type 99. Also an original monopod and a bayonet with Nagoya arsenal marking on it. If so please let me know and how much you are asking for these items. Thanks Charlton
8/10) I'm looking for an original box that a Winchester Model 1894 carbine would have been shipped in from the period of the 1940's. Please send a picture if possible. Thanks. Richard, Red Oak, Iowa
8/5) Hi, I need an original butt stock for a
Winchester
Model 61. Thanks, Brian
8/1) I am looking for a Winchester hand saw that is called OLD TRUSTY. On the saw is a horseman, a rifle and a dog. Any info you have would be appreciated. Gordon. Hi Gordon, I don't have one at this time and don't know who does. But I'll keep you in mind. That saw came as a 24" or 26" blade with several different tooth sizes. It was supposed to be from a special hardened steel that kept a fine edge. Be prepared to pay $500. and up for a decent one. Dave
7/5) Would like to know if you would have rear sight for a Savage model 19 NRA? Stephen
6/21) Looking for just the hammer for a Burnside carbine 1864. Please help. Lawrence.
6/15) Hi, I have an Iver Johnson 32 cal top break pistol S# 38322 and need a barrel latch. Can you help? Luke
5/4) Hello, I just bought a Winchester model 75. It has a globe type Lyman front sight and in the back I just have the base for an Olympic type sight. but no Olympic sight, any suggestions? On either a new type of sight to put on the rear or where I could go to get an Olympic type sight? Thanks, Mike
4/28) Would you happen to have a 28'' barrel with choke options for a Browning A5 Magnum? Mike
4/19) Dave, at the risk of being a pest, have you had a chance to look and see if you have a split spring for a Smith & Wesson safety hammerless? I have the gun disassembled and am really stuck for this part. Have tried all the usual sources and drawn a blank. Dave Can't find one, Dave
4/16) I am interested in buying a colt model 1903 .32 caliber semi auto with nickel finish with black grips. If you have one or know where I could get one, I'd like to buy it from you. Thank you, Ron
3/28) I would like to entertain any or all of the following transactions you can accommodate; 1) I would like to buy Winchester Boy Scout Commemoratives serial # 540 &/or # 580. 2) I would like to buy Winchester Eagle Scout Commemorative serial # 265. 3) I would consider a trade to include one of my Eagle Scout guns and 1 or 2 of my Boy Scout guns for a match set you might have. 4) I would like to purchase 1 or 2 suede scabbard/ sleeves from Boy Scout issue accessories. 5) I might be interested in accessory Boy
Scout gun rack. This assumes all items above, yours (and mine if trade conditions offered) are as new (guns - in box (es) with appropriate documents, etc.) Please advise ASAP for any offerings you might have. If you have none of above, but keep a search list for future contact, please include my requests on that list and contact me at such a time as you can satisfy any of my interests. I may also be in the market for a Colt pre-woodsman pistol, a Winchester model 63 rifle and/or a Remington Elliot pistol. Advise if you have anything of
interest I might not readily see on your website. Sincerely, John.
3/23) I am shopping for a Winchester Model 71 348WCF, do you have one available? Willard, Alaska. Not at the moment, Dave
3/23) Hello, I'm in need of stock and for-end for model 71 Winchester .348. I need wood for short tang and long tang, deluxe preferred. Do you have any? Thanks, Tom in Idaho
3/14) Sir: I am looking for a stock with oak leaves pattern for a model 100 Winchester rifle. Fred
2/22) We are looking for a fore-end iron for a Armsport 10 Ga. Super Goose. I hope you can help us. Thank you, J. Miller
2/11) Ancient Order of Hibernian's swords and other AOH items. Patrick.
2/7) Looking for a Winchester model 88 pre-64 .308 magazine. W. Clayton
2/6) Looking for M1 Garand Training Aid. I was in the Marines in 1958 when I was issued an M1 Garand. We went to a school in boot camp and they used a layout sheet made of oilcloth depicting a M1 Garand disassembled. This was a training aid to teach recruits how to strip and re-assemble an M1 Garand. I would like to find and purchase this training aid for my M1 Garand collection. I would appreciate any help locating this item. The reason I contacted you in this endeavor is that Winchester used to manufacture the Military M1 Garand. Thank
you. Sincerely, Robert.
2/4) Dear Sirs, I am in need of Sharps model 1859 or 1863 or 1874 internal lock mechanism (spring, screws, lever actuator, etc.) breech lowering lever. Can you supply or know where I can acquire these parts?
Best Regards, Greg.
1/28) Can you help me find a butt plate that fits on my Winchester model 100 .308 Win. automatic? Hakan.
1/23) I would like to purchase a barrel wrench and gap tool for a Dan Wesson Arms .357 Magnum. Thanks, Greg.
1/17) The Lyman gun sight sight corporation at one time was able to supply the Cutts Compensator for .30-06 and the .30-40 bolt action rifles also for shotguns. Compensators are still available for shot guns, however I'm unable to find out any info for the rifle compensators. Are there any such items yet to be had? If so please advise me as how I may obtain one of these compensators. Thank you, Rob.
12/26) I am looking for a Stevens .410 double barrel shotgun. Harry
12/23) Looking for 5 or 10 round clips, for Remington Model 37 Rangemaster, .22 cal. Dan
12/22) I am looking for an original part for a Burnside Carbine (civil war); specifically, the lever latch spring. It is about a 2 inch long by 3/8 inch piece of bent steel with a screw hole on one end located inside the trigger guard, which latches the breech into place. If you do not have an original part, do you have a reproduction? Would using a reproduction negatively impact the value of the carbine? The serial number of the carbine matches
the breech and also matches the serial number on the trigger. Thanks, Robert. Hi Robert, Spring replacement in an antique gun does not affect the value much, only to a purist, and the firearm would have to be in especially fine condition to worry about. I do not have the spring. Try Dixie Gun Works in Tennessee.
12/21) Hello. I am looking for a Lyman 3 point Micro Click New Model 1937 or Model 438 (4 Pt.) rear mount. Do you have this or know where I can find one? Would you keep me in mind if you should run across one? Thanks, Dwayne
12/16) Looking for a bolt for a 788 Remington .308. Thanks, Robert.
11/26) Hello, I was wondering if you carried a .22 cal Hi Standard military model aluminum ramp magazine. The plastic ramp just doesn't work right. If you do please let me know. Thank you, Tony.
11/23) I have recently come into possession of an early Ruger Bearcat 22 revolver. I would like to find a cardboard Ruger Red factory box and manual. Michael
11/20) Hi, I saw you had sold one of these magazines, Model 88 .308 and you noted that you occasionally stumble into one. I'm extremely interested, please let me know a.s.a.p as to the availability of this item. Derick
11/19) I need a holster and original wood grips for a Colt 1917 Army New Service. Thanks, Dave.
11/17) What I'd like to know is if you had a 12 ga. Belgium Browning A5 Slug Barrel for sale or know where I can purchase one. Used is ok, if in good condition. Thank you, Brad
11/3) Are you aware of any Belding & Mull dies that may be available? (Does anyone have any?) Ben
11/2) I'm looking for a stock for a model 88 Winchester. If you can help or know where I might find one please let me know. I thank you in advance for any help. Charles.
10/29) Hi, I'm looking for a Lyman receiver sight model 38 for a Winchester/Browning 1895. Thanks to let me know. Guy
10/29) I need a side-plate for S&W .44 DA Frontier revolver. Any ideas? Thanks, Steve.
10/27) I have a gas auto load 44 carbine and I love it. I had to send it to be fixed and Ruger wanted to keep it and trade for a different gun. I said "NO" if you can't fix it send it back. They cracked my stock (and as I live in Washington and it rains during my deer season) I need a new one. I am afraid that I am gong to have to have one custom made. Do you know where I might get one?? I would like a composite stock as it would out live me. Let me know if you know of anything. Thanks, Susan.
10/17) I have a Chamberlin Cartridge and Target "The Expert" target thrower that is missing the thrower arm spring and target cradle. I am looking to replace these parts and don't know where to look. Can you help? David, Nebraska.
10/16) Hello, I need a mainspring for a Chicago "Protector" palm pistol. Can you be of assistance? Thanks, Jim, El Cajon, CA
10/13) Hi, I need parts for a Whitney Arms Defender .22Cal. LR. All the small parts inside are bad; trigger, hammer and the pin that holds the cylinder in. The gun was found in a basement and the inside was rusted but the frame is just fine after I re-nickled it. Best regards, Dan.
10/10) My Canadian Father-in-law has a Stevens, Model 58, 20ga. shotgun. However, the poor ol' guy has lost his 3 round magazine for it! And I hate to think of anyone - especially a Canadian! - not being able to shoot their weapons. Do you folks know where I might locate one or two of these essential components? Thanks for your time. God bless, and pass the ammunition! V/R J. Brix.
10/4) I have a Westernfield M160B 20 gauge with full choke. The spring in the clip is broken and I would like to fix it or replace the clip. Any help you give me on this is appreciated. Thank you, Stephen.
10/3) Hi, I came across your website and would like to post a request in the "items wanted" area of your site if possible. I am looking for a used Marlin Camp 45 Carbine in good condition. I am in New York and would be able to attend the October show in Saratoga Springs, NY. Thanks, Steve.
9/26) I am looking for a particular blade called the Bloody Mary marked KORIUM Forged Solingen Steel made in Germany. Would like to find another one of these rare blades. Thanks, Greg.
9/6) I have acquired a Winchester Model 23 XTR Side by Side 12ga. which is missing the complete forearm assembly. Would you by chance have one? Max
8/10) Hi. Hoping you might have a pair of the wall mount racks for the Winchester 94 Bicentennial 30-30. I have a rifle but the racks were missing. Thanks, Mark M.
Procedure
